Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Archive for discussions from 2006. Please post new discussions in the appropriate forum.
Moderators: neps, Matthew, Michael Pajaro
-
Lost Knight
- FLAG Special Ops
- Posts: 2719
- Joined: Fri Aug 20, 2004 7:45 pm
- What year did the original Knight Rider start: 0
- Location: Long Island, NY
Post
by Lost Knight » Thu Mar 31, 2005 2:06 pm
KITTfan wrote:I also think it would have been better leave the hatch to not open so the rearglass would be possible to make look accurate, now the hatch opens and therefore needs the metal frame around the rearglass and it looks very wrong. I wonder if ERTL will do the hatch this way to the upcoming '82 Recaro Trans-Am model too?
I say more than likely. I think they're only going to change what absolutely has to be changed, which would be the front nose. Aside from the nose, K.I.T.T. is otherwise a stock Trans Am on the outside, so there really is no need to change any other aspects.
I think the extent of the differences for the regular model (on the outside) will be a different nose and a couple of decals saying "Trans Am" and the Firebird logo. Possibly some gold or silver trim might be added to the bottom as well. But I think the tan interior, PMD seats, and "bowling ball" hubcaps will remain. And obviously the dashboard would have to be replaced as well.
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Thu Mar 31, 2005 4:10 pm
Paul wrote:Paul wrote:
It's estimated for delivery around Thursday, so I'll let you guys know if it does have the clear lamps when it arrives.
It doesn't. Unfortunately KITT arrived this morning with the same orange fog lamps everyone else has mentioned.
Keep in mind that these photos of KITT with clear fogs have surfaced in other parts of the world, just as the original KITT did before it showed up here.
It may not be here (North America) yet, but all signs point to a new KITT with clear fogs so far... I HOPE!!!
-
HondaSiR
- FLAG Assistant
- Posts: 809
- Joined: Tue Mar 02, 2004 11:58 pm
- What year did the original Knight Rider start: 0
- Location: Asia Pacific
Post
by HondaSiR » Thu Mar 31, 2005 9:43 pm
I'm actually more excited that ERTL will release a stock Trans Am. No doubt it will have the stock bumper, dashboard and decals. Hopefully ERTL has received enough complaints about the tinted and framed rear hatch and has decided to modify their molds to appease the public. Let Michael Long's long lost car roll!
-
TransAmKITT2000
- Volunteer
- Posts: 21
- Joined: Sun Sep 05, 2004 12:28 pm
- What year did the original Knight Rider start: 0
- Location: New Brunswick,Canada
Post
by TransAmKITT2000 » Fri Apr 01, 2005 4:59 pm
I finally got my 1/18 scale die cast KITT by Ertl today and it looks
good.Despite its flaws it is a good Knight Rider item to own.When
KARR by Ertl comes available this Summer I will get that one too.
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Wed Apr 06, 2005 11:53 pm
REPLY FROM ERTL.
Hello Phil,
Just wanted to respond to your email regarding the Knight Rider K.I.T.T. The foglights on K.I.T.T have 4 clear and 2 orange and the Knight Rider K.A.R.R has 6 clear.
Unfortunately, RC2 does not stock any replacement items or extra parts, or issue refunds or exchanges for any products purchased from retail stores. If you have a product that is missing items, in need of replacement parts, damaged or defective in any way, or does not meet your expectations, please return it to the place of purchase for a refund or exchange. If it is not possible to return to the place of purchase, then you may try exchanging the product at a different store/dealer near you that carries our products.
Thanks!
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Wed Apr 06, 2005 11:55 pm
Still, I find it odd that all of a sudden photos of a 6 clear light KITT are popping up in parts of the world.
I still feel that we have a 2nd version coming our way very shortly.
Phil
On Facebook & MySpace
"One man can make a difference. Like Orville Redenbacher"
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Thu Apr 07, 2005 4:59 pm
NEW VERSION K.I.T.T. SURFACES IN TORONTO CANADA!!!!
Differences I noticed:
- 6 Clear fogs similar to the Aoshima model
- Black Base
Note that I didn't have too detailed a look, but I will be picking it up tonight.
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Fri Apr 08, 2005 1:00 am
Well, I bought the car and brought it home (Toronto, Canada) this evening. I see no differences between this & the first batch released late last year except for the fog lights.
Phil
On Facebook & MySpace
"One man can make a difference. Like Orville Redenbacher"
-
imranbecks
- FLAG Assistant
- Posts: 858
- Joined: Mon Jun 09, 2003 3:18 am
- What year did the original Knight Rider start: 0
- Location: Singapore, Asia
-
Contact:
Post
by imranbecks » Fri Apr 08, 2005 5:02 am
How are the clear foglights on the new version? Is it similar to that of Aoshima? Does it have the black dot in the center of each fog light?
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Sat Apr 09, 2005 1:04 am
Yes, the black dots are there. Similar (if not identical) to the Aoshima fog lights.
Phil
On Facebook & MySpace
"One man can make a difference. Like Orville Redenbacher"
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Sat Apr 09, 2005 1:10 am
Lost Knight wrote:KITTfan wrote:I also think it would have been better leave the hatch to not open so the rearglass would be possible to make look accurate, now the hatch opens and therefore needs the metal frame around the rearglass and it looks very wrong. I wonder if ERTL will do the hatch this way to the upcoming '82 Recaro Trans-Am model too?
I say more than likely. I think they're only going to change what absolutely has to be changed, which would be the front nose. Aside from the nose, K.I.T.T. is otherwise a stock Trans Am on the outside, so there really is no need to change any other aspects.
I think the extent of the differences for the regular model (on the outside) will be a different nose and a couple of decals saying "Trans Am" and the Firebird logo. Possibly some gold or silver trim might be added to the bottom as well. But I think the tan interior, PMD seats, and "bowling ball" hubcaps will remain. And obviously the dashboard would have to be replaced as well.
You forgot the rear tails
Has it been confirmed that the Trans Am to be released is going to be the 1982 Recaro edition?
-
KITTfan
- FLAG Operative
- Posts: 1045
- Joined: Sun Oct 20, 2002 1:01 am
- What year did the original Knight Rider start: 0
- Location: Finland
Post
by KITTfan » Sat Apr 09, 2005 3:38 am
PBH wrote:
You forgot the rear tails
Has it been confirmed that the Trans Am to be released is going to be the 1982 Recaro edition?
Oh yes, the tail lights too
I personally don't know if ERTL has officially confirmed the Trans-Am release being '82 Recaro Edition but here's where I got that impression:
http://www.scale18.com/cgi-bin/browse18 ... ear%3A1982+
<edit>
Found another mention about it:
http://www.diecastmuscle.com/store/33990
</edit>
-KITTfan-
Last edited by
KITTfan on Sat Apr 09, 2005 1:29 pm, edited 1 time in total.
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Sat Apr 09, 2005 10:00 am
KITTfan wrote:PBH wrote:
You forgot the rear tails
Has it been confirmed that the Trans Am to be released is going to be the 1982 Recaro edition?
Oh yes, the tail lights too
I personally don't know if ERTL has officially confirmed the Trans-Am release being '82 Recaro Edition but here's where I got that impression:
http://www.scale18.com/cgi-bin/browse18 ... ear%3A1982+
-KITTfan-
I've dealth with Scale18.com before. They're fast & prices are decent.
-
Turbo Man
- Stranger
- Posts: 1
- Joined: Thu Apr 07, 2005 9:27 am
- What year did the original Knight Rider start: 0
- Location: UK
Post
by Turbo Man » Sun Apr 10, 2005 9:54 am
Can anybody tell me where i can buy K.A.R.R Please?
-
HondaSiR
- FLAG Assistant
- Posts: 809
- Joined: Tue Mar 02, 2004 11:58 pm
- What year did the original Knight Rider start: 0
- Location: Asia Pacific
Post
by HondaSiR » Sun Apr 10, 2005 10:00 am
Turbo Man wrote:Can anybody tell me where i can buy K.A.R.R Please?
Which one? The upcoming 1/18 scale diecast from ERTL? It's not released yet. You'll have to wait a little more, its due out later this year.
-
PBH
- FLAG Assistant
- Posts: 566
- Joined: Wed Apr 28, 2004 10:46 pm
- What year did the original Knight Rider start: 0
- Location: Toronto, Ontario, Canada
Post
by PBH » Sun Apr 10, 2005 11:55 am
From what I got from Ertl, KARR won't be released until early Summer 2005.
Phil
On Facebook & MySpace
"One man can make a difference. Like Orville Redenbacher"
-
lordvader
- Rookie
- Posts: 52
- Joined: Wed Oct 08, 2003 10:27 pm
- What year did the original Knight Rider start: 0
- Location: Pittsburgh, PA
Post
by lordvader » Sun Apr 10, 2005 4:19 pm
I borrowed a digital camera from my Aunt and took some photos of my KITT model as well as my other models. Some are better than others in terms of quality. A few of them turned out really cool, especially the ski-mode one. Anyways, here is the link:
http://www.geocities.com/mschardt2003/models
-
KITTfan
- FLAG Operative
- Posts: 1045
- Joined: Sun Oct 20, 2002 1:01 am
- What year did the original Knight Rider start: 0
- Location: Finland
Post
by KITTfan » Mon Apr 11, 2005 1:41 pm
Nice pics lordvader, great to see another ERTL KITT using skimode
Great idea for those turboboost pics, I'm going to have to try that too sometime
-KITTfan-
-
lordvader
- Rookie
- Posts: 52
- Joined: Wed Oct 08, 2003 10:27 pm
- What year did the original Knight Rider start: 0
- Location: Pittsburgh, PA
Post
by lordvader » Mon Apr 11, 2005 3:10 pm
Thank's KITTfan. Finally someone posted about my pics. While I still have the camera, I will take a few more pics of the models. I would like to see what you have to offer KITTfan. I think it's cool that people are using their models to create scenes. We may have started something here like the Photoshop thread and Knight Rider fan art thread.
-
FuzzieDice
- KRO Podcaster (retired)
- Posts: 3333
- Joined: Tue Jun 01, 2004 5:55 pm
Post
by FuzzieDice » Tue Apr 12, 2005 3:57 pm
Wow, thanks to everyone for posting pics. I'm getting an idea of how I want to do my AMT models.
Hey, I have the ability to make small movies with sound on my digital camera. Gives me more ideas of what to do with my models.
-
xfactorzine
- Stranger
- Posts: 2
- Joined: Fri Feb 04, 2005 1:59 pm
Post
by xfactorzine » Wed Apr 13, 2005 6:20 am
Thought I'd be the first to use some photoshop with my model in turbo boost...
-
TurbomanKnight
- FLAG Operative
- Posts: 1297
- Joined: Fri Oct 17, 2003 11:09 pm
- What year did the original Knight Rider start: 0
- Location: Brooklyn, NY 11208
-
Contact:
Post
by TurbomanKnight » Wed Apr 13, 2005 5:54 pm
Turbo Man wrote:Can anybody tell me where i can buy K.A.R.R Please?
Hey there
Turbo Man
Anti-Ford. 'Nuff Said.
1988 Camaro IROC-Z28
5.7 Tuned Port Injection .040 over
700R4
2.77 posi
3" Exhaust with Headers