Page 1 of 1
Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Wed Jun 30, 2010 1:03 am
by 1batt4u
Here is the radio frame I have been working on, for your Knight 2000 or 3rd Gen. T/A 1985-1992
Brackets perfectly aligned!!
Prototype Frame
Finished Updated Frame! Long tabs in the back.
Clips/connecters on the tabs!
Updated Frame! Perfect tight even fit!! Added more curves on the bottom section than the previous frame.
Line curves perfect!!
Tell me what you guys think!!!
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Tue Jul 06, 2010 7:18 am
by msKEN
Do you make one to fit the 82-84 correct console?
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Tue Jul 06, 2010 9:31 am
by tamatt27
Looks great!
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Tue Jul 06, 2010 11:34 am
by 1batt4u
msKEN wrote:Do you make one to fit the 82-84 correct console?
I actually tried for the 82-84 radio. Making the frame itself is the easiest out of all frames I have done, the big problem with this is the metal bracket will need to be trimmed, then the actual console will have to be trimmed, top and bottom. Trimming the bottom part is actually the problem. I will try again another day.
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Tue Jul 06, 2010 6:45 pm
by andyg
1batt4u wrote:msKEN wrote:Do you make one to fit the 82-84 correct console?
I actually tried for the 82-84 radio. Making the frame itself is the easiest out of all frames I have done, the big problem with this is the metal bracket will need to be trimmed, then the actual console will have to be trimmed, top and bottom. Trimming the bottom part is actually the problem. I will try again another day.
Hey Billy,
I would be very interested in an '82-'84 style if you decide to make one. If you can make it look factory as possible with the "angle-cut" corners and and textured finish, ect.
Nice job!
Andy
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Wed Jul 06, 2011 6:08 pm
by TheSnake16
Good afternoon
Looks Great, I have been browsing around this afternoon looking for exactly this! I am putting a pioneer Avic in my 91 TA and have been looking for a custom bezel and mounting brackets. Any instructions on how tro make this? Pay you to make one??? Any thoughts or suggestions or directions would be greatly appreciated!
Thank you!
Scott
TheSnake16@hotmail.com
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Fri Jul 08, 2011 7:46 pm
by Crumbling Down
Nice job you are very talented. Looks good!
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Mon Jul 11, 2011 2:08 pm
by ILMODC
TheSnake16 wrote:Good afternoon
Looks Great, I have been browsing around this afternoon looking for exactly this! I am putting a pioneer Avic in my 91 TA and have been looking for a custom bezel and mounting brackets. Any instructions on how tro make this? Pay you to make one??? Any thoughts or suggestions or directions would be greatly appreciated!
Thank you!
Scott
TheSnake16@hotmail.com
Same here!! I got a 1987 Trans Am (Marks Nose and light) and would love to know if you can make one of these for me!! LOL. How much?
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Sat Aug 06, 2011 6:20 pm
by 1batt4u
Hi guys,
Sorry for the late response!!! Thank you for the compliments!!!!
I am planning on making a bunch of these and selling them. I want to see how many people are interested in this!!!
Thank you!!!
Billy
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Thu Aug 11, 2011 9:58 am
by TheSnake16
Hi Billy
I am really looking forward to purchasing one from you soon! My Pioneer Avic is installed just awaiting a bezel
hint hint
Thanks
Scott
Re: Knight 2000 3rd Gen. T/A Custom Radio Frame
Posted: Tue Sep 20, 2011 11:17 am
by TheSnake16
Hi Guys and Gals!
I managed to catch up with Billy and get one of these from him! If you have a double din radio and want to get it into your 3rd gen firebird this is the way to go! I will post some pics hopefully this weekend! It looks great!
Thanks Billy!