Great News for KITT Mustang Replica Builders!

[MTAK]

Where Ted?

[krkitt1]

They’re back, for one last run: The iconic wheel that became a sought-after collectible, this final Limited Edition version may be the best of them all: The wheel NOW sports engraving that salutes our Fiftieth Anniversary, with “FIFTY YEARS” engraved opposite the “SHELBY FORGED” text. These Shelby wheels are the same style, construction, and finish as those previously installed by the Shelby factory on the Shelby GT500 SuperSnake, except for the new engraving. They are the perfect complement to any Shelby or Ford Mustang.

As this is an EXTREMELY limited item, no orders can be accepted once sold out. This is the final run. Preorders are highly recommended. Limit six wheels per single deposit. Delivery in December. As a Limited item, this does NOT qualify for any Team Shelby discounts.

ONLY ONE $500 DEPOSIT IS REQUIRED FOR UP TO 6 WHEELS.



Shelby Forged 20"x9" (front) 24mm offset
(Recommended tire size: 255/35/ZR20)

$564.99
Shelby Forged 20"x10" (rear) 36.7 mm offset
(Recommended tire size: 275/35/ZR20)
$584.99
Notes:
Alcoa DuraBright finish
Engraved "Shelby Forged" and “Fifty Years”
Does not include center caps (see below)

Shelby Store 1-702-405-3500


People with the 2008 Mustang KITT Replica's need to jump on this ASAP!!! Once there gone, it's back to the high prices of Ebay.

[MTAK]

I just have Ted, thank you so much for letting us know!

I have watched so many sets go through on Ebay recently at $5k plus.....this is perfect!

[krkitt1]

Did you order a set?

[MTAK]

I certainly have!
I even emailed them to confirm and got a reply back.

I'm so pleased i do not have to keep looking on Ebay (every day) nor will i be paying around $5k for a set.

Thanks again for letting us all know.

[krkitt1]

Glad to hear that. I didn't mean to scare you about that place but just wanted to let you know. They are going to make your car look sweet... Did you go with the 20X9 all the way around or 20X10 in the rear? COOL!!! another Mustang KITT is on the way to hitting the road!!!

[MTAK]

Yes, i will be going for the 20x9 front and 20x10 rear!
I should have all my body parts by the end of the week and then it's off to the spray shop.

I might just do a separate thread showing the build progress, parts, suppliers etc

[lphill01]

Thanks for the info!! Set up for 5 20x9s!!!

[KoehlerIndustries]

Sorry for my absence fellow KI3T Builders! My computer died on me and finally I am back online! Thank You all for the help in the past getting my replica where it is today! Especially krkitt1 who has helped so much and has answered all my questions! You are the Man to go to as many of you are! Lets keep this thread moving!
As for my KI3T, I have the brake bezzels to install and the mirror covers to finish the outside, and I just have to switch my dash pannels to the black ones, and work on the blue lights above the dash. pics coming soon!

[krkitt1]

Hey great to have you back and thanks for the kind words. I will be here to help anyone out. If I have any new idea's I will pass them along. I have a few more things to get done to the car to have it complete and hope to have it done for the World Of Wheels 2013. I realy need to clean the car, been lazy and I need to get off my butt. I'm working on a A/B power source for people that go to Car Shows. Should have it completed soon. I need to just do the rear bumper and the Red inserts. Has anyone installed Carbon Fiber Mirror skull caps? I've had two pair and they fade within 6 months, My car doesn't set out side that much, anyone had another company with good luck?

[Pierre]

yes use shelby oem GT500KR cover they sell at champion mustang:)

[lphill01]

I was thinking about picking up the skullcaps from Trufiber. I have their hood in carbon fiber and it's holding up well to the Vegas sun. I just replaced my neon dash lights with LED strips and added red ones that can be switched back and forth.

[Pierre]

Ted with your experience ,why not doing a tuto for installing all the part ,at least the KR part?

[krkitt1]

Ted with your experience ,why not doing a tuto for installing all the part ,at least the KR part?

Well, I'm going to be taking everything apart again so I should do some video's and some write up's.

[BullittKnight]

new live Knight Rider wallpaper for us 2008 fans

pretty bad ass!

[MTAK]

Hey,
Can anyone tell me where i can get the side stripes from please?

I have tried a few places but the do not stock them anymore.....GT 500 KR

[MTAK]

Hi,
Joshua can you contact me reference the orb installation please.

I have the Orb but still waiting on the PDF for the installation.

I have sent you a couple of emails but had no reply so i don't know if you are receiving them or not.

If anyone else can send me the PDF or install instruction i would appreciate it.

Email - mark.takhar@gmail.com

Thanks

[taoworm2323]

E-mail sent Mark

[ACKERLY]

Hi all,I like mustang and i have mailed them about the kdr8 scanner and it possibly in to the 68kr hood and this kit is suitable for my mustan GTk5000.

[BullittKnight]

Hi guys

selling a spare Alcoa rim on Ebay 20x9

incase anyone is looking for a spare: http://www.ebay.com/itm/290826505203?ss ... 1555.l2649" onclick="window.open(this.href);return false;


thanks

[lphill01]

New Fifty year Alcoas are on!! 4 20x9 with 255/35R20 Firehawk Indy 500 wide oval tires. Went right down to Shelby headquarters to pick them up. I wouldn't reccommend cramming 5 20 inch wheels into a Mustang.

[Knight Racer]

Looks really nice.It just needs the front bumper and sanner.

[lphill01]

It already has a scanner. It just wasn't on.

[Knight Racer]

That looks incredible.Every time I see a kitt body with karr scanner I know its pure evil incarnate.It has its own identity.Are you planning on getting the bumper?Now that I see the scanner on maybe it doesn't need one.It looks great without it just with the karr scanner.If you don't mind me asking,how much did it all cost?

[Pierre]

this is the correct bumper lol