Page 16 of 42
Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 14, 2010 2:04 pm
by Pierre
yeah like you said a liter of 95 octane gazoline cost 1,35 euros so a gallon about 6 euros or 7$ if you prefert ,you know why there is only small cylinder here , the most common is 1,1 or 1,5 liter engine with about 70 HP but with a fuel economy of almost 60 mpg. And car with bigger cylinder are not free taxe for a mustang it's about 3000$ juste for having the title .I hate our governement so stupid

Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 14, 2010 2:51 pm
by spawn
He's Right about that here in Europe the gasoline prices are skyhigh.. here in Holland you do's see many V8's and in other words not many Kitt's... only kitt-Scanners in other vehicles..

like mine
gas-prices:
France $ 6.89 / gallon
Netherlands $ 7.91 / gallon
greets
Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 14, 2010 9:00 pm
by CJaguar442
you should never fill up in canada it is $6 gallon too.
drill baby drilll keep the USA gas prices low thank god for the low gas prices that we have here.
Re: Great New for KITT Mustang Replica Builders!
Posted: Sun May 16, 2010 2:37 pm
by dylandog
Hello i'll going to buy the momo trek r steering wheel, so my question is simple is it possible to take out the air bag and change the wheel? so if it's possible could you tell mehow to do it and if there is a post or a topic with pictures it will be great... Many thanks to all
see you
Re: Great New for KITT Mustang Replica Builders!
Posted: Wed May 19, 2010 8:18 pm
by krkitt1
Re: Great New for KITT Mustang Replica Builders!
Posted: Wed May 19, 2010 8:20 pm
by krkitt1
I need to get the scanner going now...... I have to start getting it ready for the first Carshow of the season this Sunday May 23rd
Re: Great New for KITT Mustang Replica Builders!
Posted: Thu May 20, 2010 12:30 pm
by tamatt27
Looks great! krkitt1!!
Dylan, yes it is possible to remove the airbag. You have to do that in order to remove the steering wheel. There should be 2 small holes on the side of the airbag. These are access holes that a special tool is inserted in in order to depress locking tabs that hold the airbag in. First start off by disconnecting the battery and waiting about 15-20 mins to be safe... Insert a small pick and 'feel' around with it until you feel the tabs. Depress one at a time and hold that side of the airbag up while you do the other side.
Re: Great New for KITT Mustang Replica Builders!
Posted: Thu May 20, 2010 12:56 pm
by Slade
Looking great krkitt

Re: Great New for KITT Mustang Replica Builders!
Posted: Wed May 26, 2010 4:01 pm
by dylandog
tamatt27 wrote:Looks great! krkitt1!!
Dylan, yes it is possible to remove the airbag. You have to do that in order to remove the steering wheel. There should be 2 small holes on the side of the airbag. These are access holes that a special tool is inserted in in order to depress locking tabs that hold the airbag in. First start off by disconnecting the battery and waiting about 15-20 mins to be safe... Insert a small pick and 'feel' around with it until you feel the tabs. Depress one at a time and hold that side of the airbag up while you do the other side.
THANKS, but after to don't have
the light on i need to do something else? because i don't want the light switch on in the dash , manu thanks

Re: Great New for KITT Mustang Replica Builders!
Posted: Wed May 26, 2010 4:54 pm
by Pierre
i've said you to use a 2 ohm resistor this is the value of the airbag and that will fake the car pcm
A lot of peoole just put the bulb out and drive without any airbag
Re: Great New for KITT Mustang Replica Builders!
Posted: Wed May 26, 2010 7:21 pm
by Slade
Im curious about the suspension,did you guys have to change it order to adjust to KI3Ts rims? or is Stock suspension ok?

Re: Great New for KITT Mustang Replica Builders!
Posted: Thu May 27, 2010 12:43 am
by Pierre
you can use the stock suspension but it doesn't look good with 20 rims so it's better to lower the car
Re: Great New for KITT Mustang Replica Builders!
Posted: Thu May 27, 2010 7:36 am
by taoworm2323
My Knight 3000 update video:
http://www.youtube.com/watch?v=EH8KIaHZ5I8" onclick="window.open(this.href);return false;
More surprises in store at the next KR Festival!
Re: Great New for KITT Mustang Replica Builders!
Posted: Thu May 27, 2010 2:39 pm
by Slade
Pierre wrote:you can use the stock suspension but it doesn't look good with 20 rims so it's better to lower the car
The rims come in 18" right?I thought there were more sizes?
Nice job Tao,cant wait for next year

Re: Great New for KITT Mustang Replica Builders!
Posted: Thu May 27, 2010 6:31 pm
by krkitt1
Well the hood is back at the shop being repainted. He was buffing the hood and burnt the clearcoat. I should get it back on Friday and the stripes go on Tuesday. I'm having 8" stripes put on.

Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 1:02 am
by Pierre
Slade wrote:Pierre wrote:you can use the stock suspension but it doesn't look good with 20 rims so it's better to lower the car
The rims come in 18" right?I thought there were more sizes?
Nice job Tao,cant wait for next year

no 20 " the 18 are for the true KR and you can't buy them without the car ,the TV series car's rim are also 20"
Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 2:46 am
by Slade
Pierre wrote:
no 20 " the 18 are for the true KR and you can't buy them without the car ,the TV series car's rim are also 20"
Doh!!! thought there were more sizes,ok so the attack mode pilot version the rims are just painted black right?
So glad I have you guys around the for help
Nice KRkitt1

Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 7:51 am
by TURBOBOOST27
Nice job dude, one thing though does gt500 nose line up with the stock mustang gt headlights and fendens?

Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 7:55 am
by krkitt1
TURBOBOOST27 wrote:Nice job dude, one thing though does gt500 nose line up with the stock mustang gt headlights and fendens?

Everything has to be changed except the fender. The bumpers, grilles, lights and all the brackets that go with the Shelby GT500 nose.
Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 11:13 am
by Pierre
yes the pilot attack mode has the rims painted black ^^
Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 12:45 pm
by Slade
Is the Pilot attack mode hood the same or is it another hood all together?

Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 2:11 pm
by Pierre
hood are all the same molded from an original KR hood
Re: Great New for KITT Mustang Replica Builders!
Posted: Fri May 28, 2010 7:11 pm
by Slade
Thanks Pierre

Re: Great New for KITT Mustang Replica Builders!
Posted: Sun May 30, 2010 5:39 pm
by Slade
Ok I have to come back to the gas question again.Will putting in Premium gas ruin the engine for a standard V8 GT?Or are you just wasting money on gas thats more expensive when the car doesnt need to take it and it really only needs regular?
Doing my homework
Re: Great New for KITT Mustang Replica Builders!
Posted: Sun May 30, 2010 9:08 pm
by tamatt27
Slade wrote:Ok I have to come back to the gas question again.Will putting in Premium gas ruin the engine for a standard V8 GT?Or are you just wasting money on gas thats more expensive when the car doesnt need to take it and it really only needs regular?
Doing my homework
I only use Premium. It won't hurt to put better gas in it than is req'd.