KITT & KARR 3D Models

ReddawgKnight · Post by **ReddawgKnight** » Mon Jan 10, 2005 2:45 pm

KITT WIP I thought id share a recent Work in Progress with you all KR Nuts...its not done yet so u dont have to point out any mistakes

If u like please post about it

Sith · Post by **Sith** » Mon Jan 10, 2005 4:03 pm

A good start for sure.

Be sure to post more images as the project moves along.

krfan1 · Post by **krfan1** » Mon Jan 10, 2005 4:30 pm

Sweet! Can't wait to see what it looks like when it is done.

krfan1

ReddawgKnight · Post by **ReddawgKnight** » Mon Jan 10, 2005 9:02 pm

*Update*

Not done yet but i kinda like the render

Post by **neps** » Mon Jan 10, 2005 10:20 pm

Nice beginning! Keep it up! What program are you using?

ReddawgKnight · Post by **ReddawgKnight** » Mon Jan 10, 2005 11:04 pm

ZModeler Neps...my friend is making it for us KR Fanatics

Knight Racer · Post by **Knight Racer** » Tue Jan 11, 2005 7:42 am

Is this going to be for vice city cause it looks great if it were.

walter h. anderson · Post by **walter h. anderson** » Tue Jan 11, 2005 1:20 pm

Why say anything about any errors?

It looks great!!!

I can't wait to see more renderings, but I'm wondering if it can be done on any drafting programs like AutoCad?

DarKSLaiN · Post by **DarKSLaiN** » Tue Jan 11, 2005 6:26 pm

wow!, impressive renders for being a superbeta

, keep up the nice work

ReddawgKnight · Post by **ReddawgKnight** » Tue Jan 11, 2005 10:47 pm

Im happy u all like it...i most definately intend for this beauty to be for GTA:ViceCity,GTA:San Andreas(when released fro PC}if possible...and a few Need For Speed Games (Most definately NFS6)

And there is also going to more likely be a KARR Version (Maybe a SKAR if it would be ok with Sith)Also fellas ...u cant have a KITT without a KARR hehe

ilana · Post by **ilana** » Wed Jan 12, 2005 1:01 am

Hey, it's a great work!! I like it very much!

What method of modeling do you use for the car? I've never heard about your program, but I think the are similar in different 3D programs... In 3D Max I would probably make it from standart geometric primitives and then turn it in into a mesh for the next modeling...
But I am not so good in the program. I'm just learning it.

With the best wishes, Ilana.

ReddawgKnight · Post by **ReddawgKnight** » Wed Jan 12, 2005 1:18 am

ilana

The modelling program that my buddy used for this project specifically is called Zanonza Modeler...u can get more info about it here http://www.zmodeler2.com/ and u can download it free also...i tried my hardest to convince him to create the car in 3DS Max or something but he kept on saying it wont be true to its real life counter part.(No Blueprints in other word)

but who knows...maybe in due time there will be a 3DS version of it created sometime...but hopefully it will look nothing like this model i found fairly recently

http://www.turbosquid.com/FullPreview/I ... ullPreview

Now the nerve of that guy to even try to sell that nasty model

Kaine · Post by **Kaine** » Wed Jan 12, 2005 3:32 pm

what reference material do you / your friend have of KITT?
i wanted to do KITT in 3dsmax for ages, but i can't find any blueprints.
not of kitt, not even of a 1982 trans am.

KITTfan · Post by **KITTfan** » Wed Jan 12, 2005 4:40 pm

Nice work with the 3d model!

I don't know if this is any help for 3d modelling but here's anyway few measurements (in centimeters) from finnish car magazine that test drove Pontiac Firebird/Trans-Am in 1982:
wheelbase: 256,5cm
length: 482,0cm
width: 182,9cm
height: 126,6cm

I don't know how many cm:s KITT's nose adds to the length though

-KITTfan-

ReddawgKnight · Post by **ReddawgKnight** » Wed Jan 12, 2005 8:48 pm

Kaine I basically supplied him with a few dozens pics of KITT and KARR that are currently available on the web

KITTfan those measurements may actually prove very useful thanx

ReddawgKnight · Post by **ReddawgKnight** » Wed Jan 12, 2005 10:53 pm

Ok heres whats been done and will most likely stay in this form...The mirrors are really tricky so ill have to have them redone,he created some very nice Stock wheels with the bbcaps and kinda correct am air scoop

HondaSiR · Post by **HondaSiR** » Wed Jan 12, 2005 11:21 pm

Don't forget to add the turn-signal blackouts and color the fender reflector yellow.

ReddawgKnight · Post by **ReddawgKnight** » Wed Jan 12, 2005 11:37 pm

I already mentioned the (Front) turning signal color.. and the rear tail lights (Blackout) assembly to be fixed so hopefully by tomorrow the whole exterior or KITT should be completed...then only problem im gonna have now is for somebody to create and interior for us...my friend is a great modeler but he says he really sux at interiors.

HondaSiR · Post by **HondaSiR** » Wed Jan 12, 2005 11:53 pm

Ooops, ok...we will all await the finished model. If your friend is having difficulties in making the interior, perhaps someone else in the forum can help, there are many talented minds here.

ilana · Post by **ilana** » Thu Jan 13, 2005 12:34 am

The last model looks really great!

Thank you for the link!!!

I'll try to learn it. Thanks a lot!
With the best wishes, Ilana.

Knight Racer · Post by **Knight Racer** » Thu Jan 13, 2005 8:21 am

Try this guy for the interior.

knightfan40@hotmail.com

He created the latest Vice city kitt and the cars dash is incredible accurate except for the monitors upper console and lower console.I have a pic of the lower console which could help that.

Heres a pic of the dash

http://arcade.ya.com/krvc/imagen30.jpg

ReddawgKnight · Post by **ReddawgKnight** » Thu Jan 13, 2005 9:25 am

Maybe he will help out...ill look him up and see what he thinks about doin an interior..thanx Racer

ReddawgKnight · Post by **ReddawgKnight** » Thu Jan 13, 2005 1:47 pm

Now heres a Sweet 3DS Max render of KITT..Enjoy

DarkSlain Can u put a blinking scanner effect on this render..like u do in ur topic?

ReddawgKnight · Post by **ReddawgKnight** » Thu Jan 13, 2005 3:41 pm

does anybody know where i can find some Nice KNIGHT Plate textures?

DarKSLaiN · Post by **DarKSLaiN** » Thu Jan 13, 2005 3:53 pm

OH MY GOD!!!! THIS MODEL ROCKS! IM ON IT MAN!

:D:D! and i will try to find some Knight plate good tex´s

KITT & KARR 3D Models

KITT & KARR 3D Models

knight rider: original

knight rider: 2008-2009

team knight rider

other knight rider

news

user contributed

videos

photos

follow us